Description

The new CMC AZTEK ProSeries System is a multi-functional masterpiece. It offers more than 100 rigging solutions in a single bag. From the cord to the pack, each component has been thoroughly tested and proven to work efficiently as part of this system. Simply put, it is one of the most versatile tools for rope rescue. Rather than burden the rescuer with lots of heavy, specialized tools that may not even be suitable for many scenarios, the new CMC AZTEK ProSeries® System was specifically designed to be light and small and contain non-specialized, efficient equipment.

The first AZTEK system to be UL Classified to NFPA 1983, the new CMC AZTEK ProSeries® System has given complete attention to every feature and function. This multi-functional system can be used for any number of rigging needs as well as personal edge protection. The new CMC AZTEK ProSeries System comes completely pre-rigged for immediate deployment – it is ready when you are!

The AZTEK ProSeries® Cord measures 15.2 m (50 ft) and is made of CMS’s high-performance 100% synthetic 8mm nylon blend, yielding a minimum breaking strength (MBS) of 38 kN (8,542 lbf). A mechanical advantage of 4:1 or 5:1 can be obtained by lengthening the set of fours up to 3.6 m (12 ft).

For personal edge use, the cord can be restricted with the use of an integrated Purcell attached to your harness. All you need to do is fasten the carabiner of the personal end of the system to a suitable anchor and gradually restrict edge travel. The cord is safeguarded from rough surfaces by the sleeved web edge-pro.

This highly adaptable AZTEK ProSeries System provides rescuers with a multitude of rigging solutions. These include:
Quickly adjusts litter attendant position
High angle litter scoops
Solo pick-off
Easily pass knots
Correct disoriented equipment under load
Effortlessly transfer loads
Promptly establish dynamic fixed brakes
Pretensioned back-ties
Redirect anchors
Establish travel restriction
Dynamic directionals
Dynamic lowers
Hauling systems
High angle attendant tether
Load-releasing hitch
Personal mechanical advantage (PMA)
Solo pick-off
Tensioned guying

The completely pre-rigged and ready-to-use AZTEK ProSeries System and Pack contains the following components:
CMC AZTEK Omni Pulley Set, (one blue, one orange) – UL Classified to NFPA 1983
Quick Pin for AZTEK Omni Pulley
AZTEK ProSeries Cord – 15.2 m (50 ft) of 8 mm hi-viz orange, 15 kN (3,372 lbf), Sewn-Eye Termination – 12 kN (2,698 lbf)
AZTEK Edge-Pro Tubular Webbing, blue .6 m (24 in)
ProTech™ Aluminum Auto-Lock Carabiner w/ removable keeper pin – 29 kN (6,519 lbf)
AZTEK Bound-Loop Prusik, orange (6 mm) – 9 in
AZTEK Bound-Loop Prusik, blue (6 mm) – 9 in
AZTEK Bound-Loop Purcell, blue (6 mm) – 42 in
Maillon Rapide Quick Link, Oval (7 mm) – 27 kN (6,070 lbf)
* Roco version of Aztek Kit also includes an additional Quick Release Pin and Safety Lanyard*

Weight: 4.3 lbs
MBS: 38kN
NFPA General Use